FM11 – Differential Pressure Transmitter (FLP)
|
||||||
Description
Special Features :
- Range : 0 ~ ±10Pa/0 ~ ±10,000Pa
- Accuracy : ±1.0%
- Supply Voltage : 16 ~ 30VAC/VDC (2-wire)
- Output signal : 0~10VDC, 4~20mA, both 2- wire, 3-wire and 4-wire available
- Selectable pressure measuring unit
- Auto zero point when power on optional
- Selectable response time field adjustable from 20mS ~2S
- Manual zero point push button
- High Protection Rate up to IP66 with Flameproof Enclosure
Application :
FM11 series differential pressure transmitter is used for measuring low pressure of air and non-combustible gases in order to monitor and control building automation, HVAC and cleanroom systems. These transmitters boast of their outstanding performance, high quality and economical pricing.
Additional information
| Protection | : IP 66; Flameproof Enclosure |
|---|---|
| Over pressure capacity | : Model Over Pressure M116 -15,000 ~ +15,000Pa M110 -150,000 ~ +150,000Pa M112 -4500 ~ +4500Pa |
| Housing Material | : Diecast Aluminium, Alloy LM6 |
| Agency Approval | : CE, CMFRI, CCOE |
| Calibration Protocol | : COML |
| Ex Protection | : Flameproof Ex ‘d’ |
| Accuracy | : ±1.0%FS |
| Pressure unit | : Pa, mmH2O, mbar, inWG, mmHG, daPa, KPa, hPa (Dip Switch Settable) |
| Output signal | : 0-10VDC and 4-20mA Simultaneous output/ 4-20mA 2 wire 0 – 10VDC, 3 wire |
| Supply voltage | : 16~30VAC; VDCfor M11x – Ax 16~30VDC; for others |
| Power consumption | : 1.5W |
| Response time | : 20mS, 0.5S, 1S, 2S settable |
| Resolution | — |
| FM110 | : 1Pa, 1mmH2O, 0.01mbar, 0.004inWG, 0.007mmHG, 0.1daPa, 0.001KPa, 0.01hPa |
| FM112 | : 1Pa,1mmH2O, 0.01mbar, 0.004inWG, 0.007mmHG, 0.1daPa, 0.001KPa, 0.01hPa |
| FM116 | : 0.1Pa, 0.01mmH2O, 0.001mbar, 0.01 daPa, 0.001 hPa |
| Zero point adjustment | : Automatic with autozero setting or with push button |
| Measuring media | : Air and neutral gas |
| Ambient temperature | : -10 ~ 60° C |
